The purchase of 3 Layer Roofing Sheet Machine requires comprehensive consideration of equipment performance, market demand, and investment return.
The following analysis is conducted from three aspects: key selection points, investment prospects, and return on investment ratio:
What should be paid attention to when purchasing 3 Layer Roofing Sheet Machine, and what are the development prospects and return rates?
1、 Core Focus Points for Purchasing
3 Layer Roofing Sheet Machine parameters and configuration
Molding ability: It is necessary to clarify the plate types (such as trapezoidal, glazed tiles, water ripple) and plate types (color steel plate, non G550, stainless steel plate, etc.) supported by the tile press machine, and customize them according to market demand
Key component quality: Focus on the diameter of the profiled shaft, the thickness of the steel sleeve (recommended to be ≥ 1.5mm), the materials used for the large frame, the weight of the machine, etc., to avoid affecting the service life due to low price reduction.
Manufacturer qualification: Priority should be given to physical manufacturers, verifying production licenses and after-sales service capabilities to avoid repair difficulties caused by “shell companies”.
Production efficiency and cost
The 3 Layer Roofing Sheet Machine can improve production speed, such as integrated design, equipped with automatic palletizing machine, reduce process handling, and lower labor and raw material costs.
Compare the production speed of different machines to balance initial investment and long-term benefits.
2、 Investment prospect to return ratio
Market potential: There is a strong demand for equipment updates in the manufacturing industry, with a year-on-year growth rate of 65.5% in related investment heat in 2024. Color steel tiles are widely used in construction, temporary facilities, and other fields
Return calculation:
Case reference: If the daily output of old equipment decreases from 1000 to 700 pieces, the annual loss is about $20500; The new equipment (such as a $15000 investment) can increase the daily average to $170, with an annual income increase of $34000 and a payback period of about 8 months.
Cost control: The fully automatic tile press reduces the scrap rate and saves maintenance and labor costs in the long run.
3、 Purchase advice
Recommended conditions: If the local demand for building materials is stable (such as construction sites and factories), and the manufacturer provides customized services and perfect after-sales service, the 3 Layer Roofing Sheet Machine is a cost-effective choice
Risk Warning: It is necessary to evaluate the adaptability of the area (such as the size of the plot and power conditions) to avoid idle equipment; Suggest conducting on-site inspections to verify the certificate of conformity and trial operation status
Summary: The 3 Layer Roofing Sheet Machine is suitable for investors with stable orders, focusing on equipment quality and local market demand, and reasonably calculating the return period (usually 1 year). If the conditions match, it is recommended to purchase to enhance competitiveness.
| NO. | Item | Specification |
| Material | Raw material | Galvanized steel or PPGI |
| Thickness | 0.3mm—0.8 mm | |
| Decoiler | Operation | Manual or Hydraulic |
| Weight capacity | 3T 5T 7T 10T | |
| Machine | Roller station | 14-22 or depend on customer’ drawing |
| Shaft diameter | 70mm—80 mm | |
| Machine body frame | 350H steel | |
| Roller material | Cr12 | |
| Machine size | About 6*1.5*1.2 m | |
| Machine weight | 4 – 6 tons | |
| Machine color | As customer need | |
| Working speed | 12-60 m/min | |
| Cutter | Hardness | 50-65 HRC |
| Cutting tolerance | ± 1mm | |
| Material | Cr12 | |
| Operate | Hydraulic cutting | |
| Power | Main motor | 7.5 KW |
| Pump motor for cutter | 5.5 KW | |
| Voltage | 380V/50HZ, 3P or Customized as customer’ request |
1. A machine doesn't just provide a few photos to prove what they can produce
2. A machine should have a complete production and assembly system photos and videos. When choosing a company with a factory, it is necessary to ensure that the company has a complete after-sales service system.
Our company's engineers have studied in well-known European cold bending companies and have great advantages in machine design and R&D and manufacturing.
Generally speaking, the machine takes about 40 days to complete, if you need a machine urgently, we can make it urgently, because I have a large number of spare parts.
Because we insist that every factory should put quality first, we make the machines more automated, more reliable and accurate, and have a longer service life.
The equipment can be used for nearly 20 years, and we provide lifetime after-sales service.
Product quality is the ultimate, the biggest after-sales service is service, 26 years of production experience, to be a service company that you have the strength to guarantee
1. Give me the dimension drawing and thickness, it is very important.
2. If you have requirements for production speed, power, voltage and brand, please explain in advance.
3. If you don't have your own outline drawing, we can recommend some models according to your local market standard.
At here, it’s all about giving the clients the best quality products.
Hebei Liming Stamping Form Machine Co.,Ltd
Copyright©2025 Hebei Liming Stamping Form Machine Co.,Ltd. All Rights Reserved
